# GMSL This guide covers connecting and configuring a GMSL camera using the AAEON CEXD-INTRBL FAKRA ports. Use of this interface requires software setup, including installing the Robotics AI Suite. Make sure you've followed the [Getting Started](../../../getting_started.md) guide. ## Physical Connection The AAEON CEXD-INTRBL development kit includes a built-in GMSL connector board. You can see two FAKRA connectors exposed on the external housing. These support up to 8 connections, split between both ports. ![CEXD GMSL with connected RealSense](../images/CEXD_GMSL_connected.jpg) For RealSense D457 GMSL cameras, connect a maximum of 2 cameras to each GMSL 4-in-1 FAKRA port. This optimizes bandwidth for the multi-sensor devices. Additional connections for this camera is not currently supported by Robotics AI Suites, and may not be supported by the manufacturer. ## BIOS Configuration You can access the ACPI GMSL settings under the `System IO` menu. ![CEXD BIOS Main](../images/bios_CEXD_GMSL_1.png) ![CEXD BIOS System I/O camera initial](../images/bios_CEXD_GMSL_2.png) Select Camera1 and make sure all are `Disabled`. ## Next steps Once you've setup your ACPI GMSL settings for your camera, continue with [Step 2: GMSL Software Driver](../../../../components/sensors/cameras/gmsl/index.md#step-2-gmsl-software-driver)